The NEW PUK 6.1 - the LATEST INNOVATION from Lampert

The PUK 6.1 is the logical further development of the globally successful PUK 6 and benefits from 24 years of experience and expertise in the development of welding equipment for jewelry manufacturers, goldsmiths, silversmiths, jewelers, watchmakers and many more.

The PUK 6.1 not only offers a faster spot weld sequence, the speed can now also be set continuously. In addition, up to 5 individual configurations can be saved permanently and the PUK 6.1 starts automatically from standby mode in the last settings having been used. The PUK 6.1 has a new PIN mode on board for welding pins or ear studs.

Computer-aided simulations and numerous welding tests have once again noticeably improved the precision, homogeneity and appearance of the precious metal welding spots compared to the PUK 6. This takes the fine welding technology of the PUK 6.1 to an uprecedented new level.

The PUK 6.1 easily handles material thicknesses of less than 0.2 mm and, in addition to welding all precious metal alloys for fittings, studs, eyelets, chain links, rings etc., now also enables simple welding of ear studs and pins.

WELDING

Up to 3.3 welding spots per second: Welding sequence now up to 65 % faster
Smoother, more homogeneous weld spots – excellent weld seam even with variable weld spot gaps
Higher heat input where needed: Perfect welding results even with critical materials
50 % smaller welding spots in low power range
Minimal pulse duration now down to 0.1 ms:
67 % shorter welding time in micro mode

HANDPIECE AND ELECTRODE

20 % faster and, thus, more agile electrode travel
Maximum electrode thickness now up to 1 mm
Up to 50 % longer service life of the electrode
_{(Measured average improvement in test trials; actual improvement depending on individual usage mode)}

HANDLING

70 % higher screen resolution for improved viewing angle in any operating condition
Quick operation and material selection through direct menu selection with one single turn-push-tilt knob
New standby mode: Continuous availability
at 85 % lower energy consumption

DESIGN

Newly structured display design with
improved resolution
Clear design language with timeless aesthetics –
a visual highlight at every workplace
Fine, selected materials for highest standards
on value and appearance

PERFORMANCE

Optimised welding curves for all weldable alloys
in jewellery manufacturing
Higher maximum power and improved welding performance, particularly with highly conductive silver, copper and tin alloys due to new speed function
New standby mode – quick restart,
minimum energy consumption

OPERATION & FUNCTIONALITY

NEW: One-hand joystick with turn-push-tilt function as well as simplified, intuitive menu guidance

Quicker maximum welding spot sequences due to the enhanced speed function – adjustable in 3 levels
Refined micro-mode enables new welding possibilities with finer increments in adjustment when welding at the lowest possible performance range
Newly designed and patented welding process control prevents welding errors, enables even quicker learning of the PUK welding – easier start for the PUK beginner

INCLUDES

Handpiece
3m Gas Hose
Power Cord
1x Contact Clamp
Diamond Grinding Wheel
6x Electrodes (0.8mm x 4, 1.0mm x 2)
PUK Flow Regulator
Welding Microscope SM6
Electrode Grinding Motor
PUK6

Cart (0)